Tag: edging

Marlis Edging

Marlis Edging on wandasknottythoughts
Marlis Edging in Lizbeth #698 Fudge Med and #603 Ecru size 10
This is another edging I made last fall.  Yes, it is similar to Kamryn because I had an idea in mind that I was working toward and Marlis was one of the first versions of that idea.  I’m not all that happy with it, though once I added the second row where it is attached the material I liked it a lot better.  The colors look pretty good with the runner material, though.After I had made Marlis and Kamryn – and a few other edgings – I saw a picture of an edging that is along the lines I originally was headed.  Fox over at tat-ology made ‘Gardenia’ by Iris Niebach, which if I’d seen it first I might have made it instead (I am sure I read about it on Fox’s blog when she posted about it, but I’ve slept a couple of times since then). Oh, well, this way meant I had to take a chance at figuring out just what it was I did wanted and if I could get there from where I was.

I had a lot of fun in the trying.

“Just keep taking chances and having fun.”
Garth Brooks
brainyquote.com 

Kamryn Edging

 I just love the material for this table runner.  I picked it up at JoAnn’s when they had a lot of material on sale for 40% off.  There was lady there that was looking at fall-themed material at the same time I was. We liked so many of the same materials that we went to the cutting table at the same time so all of it could be cut for both of us while it was out.  We had a nice conversation while we were checking out the material. Fellow crafters can be pretty nice people.
Kamryn Edging, tatted edging on table runner with fall material on wandasknottythoughts
 Kamrny Edging © Wanda Salmans 2015
This edging was the last one I did before the craft show and it wasn’t supposed to go with this material.  But after finishing it and laying it with the other material it just wasn’t going to work; both my daughters agreed with me.  The two edgings and materials were swapped and all looked much better for it.Kamryn is a very easy edging, with only rings and chains.  Surprisingly it has no thrown rings, split rings or shuttle switching.  It went very fast, which is why it made it to the craft show. (It was the first thing sold, right at the start of the show). I think there are similar patterns out there but I was not following one when I made this, I just started and this is what came off the shuttles.

Kamryn Edging up close, tatted edging on table runner with fall material on wandasknottythoughts
Kamryn Edging in Lizbeth Fudge Med # 698 & Harvest Orange Med #694
© Wanda Salmans 2015
I’m very happy with how this came out.  Sewing it on went much faster than usual because I took Michelle’s advice to use invisible thread.  She had suggested to sew it on with the machine but mine wouldn’t work. Maybe the tatting was too thick for the setting on the machine??  What-ever the problem, I had to do it by hand, but the invisible thread mostly made it go much faster even doing it by hand.   Why had I not tried this before???
The last couple of weeks had a lot of things happening around here.  About November 18th western Kansas had a blizzard and ended up with 20 inches of snow (that’s a lot of blowing snow out there!); on the 19th we experienced a 4.7 magnitude earthquake that was centered in northern Oklahoma which I felt at our house north of Wichita (Kansas has felt 162 earthquakes in the last month); then abnormally high temperatures for several days, around 65ºF to 70ºF, then an ice storm over the Thanksgiving weekend (lots of power outages due to broken power lines and downed trees).  We are now experiencing pleasant temperatures and sunny skies, which I am thankful for.
I’m not sure what to expect next from the weather or other natural phenomenon, but I do know what to expect next from me: I will be working on the Round Robin doily I’m doing on Craftree and things for Christmas.
How about you?  What are you making?“There is no “buy” there is only DIY”

Eleonore Edging

I made several edgings this year going for a certain look.  This is one that isn’t quite what I was looking for but not bad and works with the material I attached it to.  I’m not sure you can see just how well the green in the edging goes with the green in the material.
 Eleonore Edging © Wanda Salmans 2015 wandasknottythoughts
Eleonore Edging © Wanda Salmans 2015

I used Lizbeth Leaf Green Medium #684 and Ecru #603 in size 10.

 It’s interesting that much of the fabric I found this year have this shade of green in them.  I could almost use this color in every table runner I’ve been working on. And I have found a lot of fabric this year, so much that I could make runners for several years and never buy any more material except for backings.  This fun fabric is one that I picked up at the store that is going out of business.
I was having a hard time coming up with a name for this edging.  It doesn’t necessarily look like anything, I didn’t make it for any particular person, and I don’t want to name it by the color, so what should I name it?  Did you know there are places that generate names?   I tried a site called “Behind the Names: Random Name Generator and it gave me ‘Eleonore’.  It works.
I’ve been spending a lot of time getting ready for the craft show this coming weekend, sewing in ends, coming up with prices, and planning the booth layout.  I’m feeling pretty good about it right now.  We’ll see how I feel come Friday night. :-0
“A poet’s work is to name the unnameable, to point at frauds, to take sides, start arguments, shape the world, and stop it going to sleep.”
Salman Rushdie

Table Runner with Queen’s Crown Edging

Do you remember way back in February I made the edging Queens Crown Edging?
Well, I finally got it attached to the material! Yay!

http://www.wandasknottythoughts.com/2015/02/queens-crown-edging/
Queen’s Crown Edging © Wanda Salmans

I like making edgings and seeing the tatting on the material, but I really don’t like sewing the tatting to the material.  This part of the process is a necessary evil to finishing a table runner.

The finished table runner is 11 1/2 inches wide and 46 inches long, including the tatted edging which is Lizbeth #693 Linen Medium size 10.  I think it turned out well.

I have several other edgings already tatted and ready to go on material.  My sister is very sweet and offered to sew the material for me as her sewing machine is always out.  I cut the material for several runners then she sewed them.  I will turn them right-side out, stitch up the hole left for that and sew the edgings on.  I feel it takes me forever to do the hand stitching but it is worth it.  I’ll be sharing more table runners in the next few weeks.

My sister and I are going to be in a local craft show next week.  We usually participate in this one every year because it is local, making it much easier for both of us to go.  Going to craft shows much farther away can get complicated with our jobs.  Sometimes we do well, other times not so well, but we both enjoy participating in the show because of the festive atmosphere, the customers and the other crafters contributing to an enjoyable day.  Last year I did well with table runners and I’m hoping to do so again this year.

Something funny about this edging: I made this one and two others and put them in a drawer when they were finished, planning on putting them on runners when the material was sewn.  In the course of tatting other things and life happening I forgot about them until I was looking for something else. I also changed my mind on what material all three edgings were going to go on. But they all look really good finished.Yay!
“Of course I talk to myself when I tat. Sometimes I need expert advice.”

Mandy in Autumn Spice

I don’t usually make the same pattern more than once at a time, preferring to go on to other things or change it up in some way. It’s true this time, too, mostly.  Yes, this is ‘Mandy’ again – without any changes except thread color! – and this post is right after one where I talk about ‘Mandy’ in orange and brown.  But I didn’t tat them one after the other, I just finished sewing them to the table runners one after the other. 
‘Mandy’ Edging © Wanda Salmans 2015
Lizbeth #136 Autumn Spice in size 10
About the only things I sew are table runners, but I love shopping for material. I have quite the stash to prove it, too.  I usually have at least a vague idea of what I would like to tat for each material when it’s purchased whether I ever get to it or not. When I do get to making the edgings I try to match the pattern to the material as well as the thread. Sometimes this takes a while and sometimes everything just falls into place.

‘Mandy’ Edging © Wanda Salmans 2015
Lizbeth #136 Autumn Spice in size 10

The edging for this runner kind of came as a surprise.  I had another thread and another pattern in mind for it, this one was actually for something else. But when I laid this edging close to the material I couldn’t believe how well the colors went together.  Plans changed right away. In a good way!
This table runner is the same size as the other one, 12 inches by just over 40 inches. I don’t know if you’re into roosters or not, but this runner looks pretty good!
“As with anything creative, change is inevitable.”
Enya
brainyquote.com

Mandy in orange and brown

A couple of months ago I made this ‘Mandy’ edging in orange and brown.  I finally have it stitched on the runner.
‘Mandy’ Edging © Wanda Salmans 2015
 Lizbeth #694 Harvest Orange Medium and #692 Mocha Brown Dark size 10
The picture doesn’t show very well how good the thread goes with the material – lighting? angle? background? – but in person the two are a great match.

Here it is again showing a bit of the material that is the backing of the runner. It shows it off a bit better than the other background. 
The runner is 12 inches wide and a little over 40 inches long. I’m very pleased with how this turned out. 
I also finished adding ‘Finn’ to the runner I started last week. That took a lot longer to sew on than this did.  I like both patterns but I like this one much better when it comes to sewing it down because it went so much faster.  But if I had a choice between sewing by hand or doing any kind of housework the sewing would win hands down!
“I’d rather be stitchin’
than in the kitchen!”
Author Unknown
quotegarden.com

Finn on the edge

Now comes the hard part – sewing an edging to the material.
At least it is for me.
The fun is in the tatting – and the end result when it’s completely on the material.  The actual sewing-on is slow.

‘Finn’ edging © Wanda Salmans
I had trouble making up my mind which side of the tatting would be ‘up’, or sewed to the material.  Originally it was supposed to be the other way ’round.  I took a picture of it on my phone both ways  so I could quickly go back and forth to make the decision.
‘Finn’ edging © Wanda Salman close up
When making the edging the rings with only one picot were going to be attached to the material.  Having decided the other side looked better put me in a bind as to how to sew it on.  Laying the rings on top of the material instead of at the edge looks great but it also means sewing each picot down as well as a stitch right at the edge of the material.
Having to flip to the back-side for every stitch to make sure the backing didn’t get caught is a real pain.  It will be worth it but makes the stitching go even slower than usual.
It will be worth it, it will be worth it, it will be worth it.
If said often enough will it make it go easier and faster?
I have a bag with lots of doodles (okay, all over the house I have doodles….) from the tail end of projects, those little bits of thread left on a shuttle that I hate to throw away but isn’t enough to do much with except make butterflies and flowers out of. I was trying to come up with different ways and places to use them when I had a thought.  I don’t know that it was a good one but I have so many of these doodles that will never get used that I’m not wasting anything except maybe my time.
The idea is to make the tatting look like it is part of the wood or metal. These are wooden pieces but I thought maybe it could work on metal as well.  I have some plain metal picture frames that I thought would look cool to have ‘metal’ tatting on them.  I’m not there yet but I’m going to try again.  
If nothing else it’s a fun experiment.
What do you think?
“I love fools’ experiments. I am always making them.”
Charles Darwin
brainyquote.com

Happy on the edge

Yes, after taking a break and working on other things I’m happily back to working on edgings.  One day very soon I’m going to have to start attaching them to the material part of the runners, but I’m so much happier tatting them than sewing them down!
‘Finn’ © Wanda Salmans 2015
‘Finn’ was made with DMC #437 Tan LT in size 10 (it always looks more gold to me than tan).
The pattern is actually one I came up with a few years ago to edge a Christmas stocking I made for an Advent gift exchange. I changed it up only by adding another row to make it a deeper edging.
I posted about this here for a December 2010 Advent swap

The stocking edging was made in white size 20.  I liked it but never jotted it down anywhere because I was in a hurry getting things made for Christmas.  I thought of this pattern a week or so ago and decided to try it again.  Yes, I plan on writing out the pattern but, no, I haven’t yet.

I’m actually pretty happy with myself lately.  I’ve actually been using patterns I already have instead of starting from scratch on new designs every time.  Not that I haven’t made changes to about every one of them in some manner or another, but I’ve based them on patterns that already existed.  I say happy in that designing from scratch usually takes more time than using one that’s already been done, and I really need to put the time into the tatting instead of the designing.  Now if a pattern just comes to mind that’s great and I go with it, but right now I just need to get some edgings done.

But I really need to start sewing them down soon. Happiness is a finished table runner!

“Happiness is not something you postpone for the future; it is something you design for the present.”
Jim Rohn
www.brainyquote.com

Emma pattern is posted

I finally finished the pattern for Emma!
It has taken me longer than expected, mostly because I kept trying different stitch counts in a few places.  I think I’m happy with it now.
The one place I did change the stitch count was the chains going up to and down from the top clover. Originally – and how I tatted the edging in the picture – the stitch count was 4 ds on each chain.  But, though it looked good when done, it had to be straightened by blocking or it twisted, so I changed them to 6 ds.  I also changed the two rings before and after those chains, making them 3-3 instead of 4-4.  Now when done it lays nice before any blocking.
It looks like I need to change the pictures I used on the patterns.  On screen it looks okay, but when I printed it the colors are so similar it’s a little hard to distinguish.  Maybe it’s just my printer?
So, for those who have expressed interest in tatting Emma, the pattern has been added to the patterns tab.
I have another edging done.  I haven’t even started writing out the pattern yet, but it is an easier one so shouldn’t take long.  Key word: shouldn’t.  We’ll see – if I think I need to make any changes on this one.
“All fixed set patterns are incapable of adaptability or pliability. The truth is outside of all fixed patterns.”
Bruce Lee
brainyquote.com

On the edge with Emma

 Emma Edging © Wanda Salmans 2015
Here’s another edging I’ve been working on, Emma.  Last week I talked about using more colors, and I did, just very neutral colors, Lizbeth #691 Mocha Brown Medium and #693 Linen Medium, both in size 10.  They are similar enough to each other that sometimes in the evenings when I was refilling the shuttles I had to compare the two threads to make sure which one I needed.  But the subtle color change really works with the material I have picked out for this edging.
Emma Edging in size 10
Part of this edging I made for a runner for the Christmas craft show last year.  Surprise! I changed it a bit this time around.  Actually, just the second row, the first row is the same.  The second row is different because I wanted the edging to be wider.  
Emma Edging in size 20
This is a sample in size 20, Lizbeth  #602 Natural and #658 Ocean Turquoise Light.  I used these colors because I had shuttles already wound with them.  Hey, one of the shuttles is now empty – yay! This sample has a bit of a different stitch count than the finished edging in a couple of places as I decide what works the best.
Emma Edging in two sizes
I use size 10 thread for runners because it covers more edge faster.  It doesn’t look as delicate as it would with smaller thread, but for table runners where the lace hangs over the edge of the table the heavier thread works better, I think.  At least it doesn’t take as long 🙂
I hope to have the pattern for Emma posted later this week.  Part of it’s done already but I also have to decide if I want to change the stitch count in a couple of places.  Oh, yeah, and try and catch mistakes 😛
I’ve got another edging almost finished then I need to figure out what I want to do on another.  I think I know the colors of thread I want to use but I’m not sure of the pattern.  Will it be a new one?  Will it be one I’ve done before? Will it be a combination of new and old?
I’m on edge to find out!
“They dined on mince, and slices of quince, 
Which they ate with a runcible spoon;
And hand in hand, on the edge of the sand, 
They danced by the light of the moon.”
Edward Lear
www.brainyquote.com