I’ve been making several of my Button Kitty because they are fun to make. Thanks, Marie Mccurry of West Pine Creations for sharing the kitties she made. Check out the post on my Facebook page to see them. She added beads for eyes and such cute ears!
I also have a few ideas about other things to do with the pattern. I’ve been trying a few things, which aren’t bad but I’m not sure they turn out quite like my vision.
From a cat to something else
I had already thought of making the ears bigger but I loved Marie’s addition of the beads for the eyes. I also thought maybe a bigger bead for the nose. I got all that. But what is it?
Then I tried again.
Another try
I did the beads again and the nose a bit differently. I like it, though I did goof on one of the eye placements. But again, I’m not sure it looks quite like I what I had in mind. Cute, though.
So, what do you think they look like?
“We live in the world our questions create.” David Cooperrider
I have been doing some tatting lately, not always what I should be doing but enjoying what I have been doing. I realized a few days ago that it will be autumn soon, with cooler weather and fall colors. This inspired me to tat with browns and oranges. And try a few different patterns.
A kitty and pumpkin on burlap
I’m not sure I like the burlap as a background, but I do like the kitty and pumpkin. The kitty was motivated by my Morgan Mouse pattern. I thought I saw a kitty in it the other day when I glanced over it. I’m pleased by how it turned out, the right background or not. I used size 20 thread and a 1/2 inch button. I have the pattern done if you’re interested, it’s on My Patterns page.
We have a cute dog, Bonnie, a Corgi mix. We did some training to get her to obey and have better manners, and now she and I spend our days together without too many problems. But once in a while, there are still times…
Tangled thread
I must admit that leaving my tatting where she could get at it was my fault, not hers. But it was aggravating to find an almost full ball of thread in a tangled mess. It took an hour and a half to untangle it. I didn’t even think about it being left out when I went out to water my plants, or that she was in the house by herself.
I have a lot of pretty shuttles I could use, but I usually tat with inexpensive Clover shuttles. I’m so glad I did this time because it wasn’t only the ball of thread she got to.
Chewed-on shuttleDoggy toy shuttle
As you can see, she thought the shuttle was a nice chew toy. I used fine sandpaper to smooth out the teeth marks, which worked well. It might not be pretty, but it is much smoother now.
Shuttle after a bit of work
Bonnie chewed on the backend of the shuttle so the pointy tip was not damaged. The backend was sprung, which didn’t mean it couldn’t be used, but I thought I’d try fixing that, too.
Shuttle after a bit of work
I put the shuttle in hot water for a bit, then clipped on a clothespin and did it again. The tips are closer than they were. I’m going to try it again, to see if I can’t get them a bit closer. I used the shuttle on a small project the way it is and the thread did not catch on any rough spots, so even if I can’t get the ends any closer I haven’t lost a shuttle.
I submitted the pattern that I’ve been working on to Tatting Corner for the chance to teach it on the cruise. I received nice comments from the test tatters on it, so I’m hoping there will be enough interest in it for others to want to do it.
I do not receive anything from Tatting Corner for including them in my post or if anyone clicks the link.
“Cat’s motto: No matter what you’ve done wrong, always try to make it look like the dog did it.” – Unknown
I have been tatting but nothing I can share. I designed a pattern I hope will be accepted for Tatting Corner’s cruise next year. I have sent it to a couple of test tatters, two for shuttle and one who also needle tats. The shuttle tatting pattern has been approved by the testers, now I’m just waiting on the needle tatter to help me with needle notations. I can’t share this until sometime after the cruise.
Yes, I still have things to share from Tat Days. It was a busy week, from when we left home until we returned.
When we got to the Tatting Corner shop Thursday (7/7) morning my husband immediately started looking for things for me. I had to stop him as I had plans for the auction on Saturday – we couldn’t spend all of our money right away! We did keep a few things he liked and a few things I picked out.
Mahogany shuttle
This is a Mahogany shuttle that Jack liked. I’ve already been using it and it tats nicely. The clover shuttle is there for a size reference.
Celic shuttle
This is a redwood Celic shuttle. I thought at first it was a Celtic shuttle, but it’s too wide for that style. I finally looked it up online. Celic is a town and municipality in Bosnia and Herzegovina according to Wikipedia, make what you will of that. Google maps show it in the northeast part of the country of Bosnia and Herzegovina. I take it to mean that it is from or like shuttles of that area. I haven’t tried it yet.
I picked up a couple of shuttles from nekonomekoubou. I don’t know that I’ll ever use them but I think they are so cute!
Cat shuttleBird shuttle
Aren’t they gorgeous? My granddaughter loves the cat one. The clover shuttle is there for size comparison. I’m afraid to use them yet, afraid I’d drop them! For now, I’ll just admire them.
On our way to Indiana, we stopped for the night in Hannibal, Missouri, which is the boyhood home of Mark Twain. The area we were in looked intriguing but it was so hot we didn’t feel like getting out to look around. We went to the Riverside Inn where we had a room for the night and didn’t go out again. Our rooms had a view of the Mississippi River and a Mexican restaurant down the stairs and through a door. That was the extent of our exploring that evening. The next morning we did drive through the area but it was too early for most things to be open.
The lighthouse in Hannibal
We had planned to meet with Diane, the Lace-lovin’ Librarian, and her husband for lunch on Wednesday but they had problems with their water well and couldn’t make it. It was disappointing but completely understandable. Instead, we stopped in Springfield, Illinois to see the area where Abraham Lincoln lived just before they went to Washington, DC. Neither Jack nor I had ever been there. We only spent a couple of hours there but it was interesting.
Abe’s house
Lincoln’s house was the only building you had to have a ticket for and go on a guided tour of. The timing wasn’t right for that so we only saw the outside of it, plus the neighborhood. If we get back in Springfield we’ll try to go back again.
On the way home, we went through Vandalia, Illinois, and stopped there for a bit of lunch. We were surprised to notice they have a miniature gateway arch.
Vandalia arch
You can see that it is much smaller than the one in St. Louis, LOL.
Jack was going to turn back and get on the Interstate the same way we got off, but I saw something interesting on the map that I wanted to check out. It was easy to get to and close to the next Interstate entrance.
The Kaskaskia Dragon
The Kaskaskia dragon actually breaths fire, for a few tokens. We didn’t buy any so I didn’t see it breathe fire, but the mouth sure looked like it did.
Kaskaskia DragonVandalia knight
The knight looks like he’s gotten the rough end of the deal.
I don’t recall seeing the sign, but I understand this tourist attraction is to draw people to the Kiskiskia Dragon RV park. I’m not advertising for them, we just enjoyed the dragon.
I’m hoping to have some tatting done by next week that I can share. I still have things to share from Tat Days, like the items I bought at the auction. Let’s see if I can post by next Monday!
“Travel becomes a strategy for accumulating photographs.” Susan Sontag
Wow, I can’t believe it’s been two weeks since Tatting Corner’s Tat Days. I still haven’t finished Pearl as I’ve been busy tatting for several other things, but everything else from Tat Days is done.
Circle be unbroken
I finished Mary Anna Robinson’s ‘Circle Be Unbroken’ covered cabone ring while we were on the way home. I’m not sure I got it quite right but it looks good, so I’m happy with it. I had fun in Mary Anna’s class. Thanks, Mary Anna!
Dona’s Christmas Stocking
I also finished ‘Dona’s Christmas Stocking’ on the way home. I made at least one wrong join on one side, but it worked out okay when I put the two sides together. I’m not sure I got the fringe at the time quite right, either, but there is an opening at the top, so it came out alright, too. This is very cute. I can see myself making more of these, maybe for my family Christmas ornament this year.
Dorset Button with Tatting #3
I worked on Mike Lyon’s Dorset button on the way home also but didn’t finish it. I actually started the center weaving again, which is still off-center, but it looks better than my first try. I made the picots on the cabone ring waaayy too big, which messed up the sizing on the outside tatting. I’m still happy with it though I’ll try to do better on the next one I make. I’m sure I’ll be doing Dorset buttons again, though I don’t know when.
I have several time-sensitive projects right now so I am waiting to finish Pearl until they are done. I’ve been seeing other people’s mermaids on Facebook, which has me itching to pick her up again, but I must be strong! I WILL finish her, but later.
I’m so excited about next year’s tatting cruise. My sister, who is coming too, and I have been talking about things we’ll need and things we want to do. Yes, it’s next year, but there’s a lot to think about when you haven’t done it before. Some of it we definitely need to start saving for. While I’m writing this post I have Dishnetwork’s Dishscape of a coral reef on the TV, keeping me in the mood for the trip! (A screen saver with sound.)
Dishscape of a coral reef
I am not associated in any way with Dishnetwork and make no income from this mention.
“God moves in a mysterious way, His wonders to perform. He plants his footsteps in the sea, and rides upon the storm.” William Cowper
I am so inspired by my experience at Tat Days that I have all kinds of ideas for new things to tat. I’m not sure when I’ll have the time to try them all! I did finish all of my projects from Tat Days except for Pearl, the mermaid.
3 Bugle Picot Motif
The 3 Bugle Picot motif is the only project I finished at Tat Days, except for sewing in the ends. It’s almost amazing that I finished it there, all the stops and starts I did. Marsha Bramson and K Boniface set up at one of the round dinner tables instead of at a long class table and I almost missed that they had started. Several people that hadn’t signed up for the class joined, they didn’t realize at first it was a class and not a tat-n-chat. Marsha and K brought all kinds of beads that we could use and there were lots of discussions going on about the class patterns and bead uses. I had trouble choosing what I wanted to do, then kept loading the beads wrong.
Bugle mania class with MarshaBugle mania with K
The class time seemed to go very fast! As I don’t use beads often I learned a lot. Did you notice how those bugle beads are used in the motif? Both K and Marsha had good suggestions and helpful hints.
I enjoyed that class so much that this week while I was at JoAnn’s I noticed they had bugle beads on sale – 40% off *smile* – so I acquired some. Now I can try the other patterns from the class.
Bugle beads
Lisa had tables set up for any show-and-tell items people brought. There wasn’t a lot, but those that brought items were very interesting to look at. I brought a few things myself to share.
Show and tell items at Tat Days
I brought the flowers and butterflies decorated bangle I made and finished it off with a prism in the center. I also brought a decorated wishbone, done without the thimble holder. Interestingly, two of the classes I took were covering cabone rings, which is done the same way I covered the bangle bracelets and the wishbone that I brought. I’ll share those projects in another post.
Did you hear? Lisa is doing another Tatting Corner cruise! It’s “Knotical Adventures” on the Royal Caribbean ship ‘Harmony of the Seas’, leaving from Galveston in November of 2023. And I get to go!! Whoo hoo! Check it out on Tatting Corner’s website.
“You don’t learn to walk by following rules. You learn by doing, and by falling over.” Richard Branson
Lisa, at Tatting Corner, hosted her 2022 Tat Days July 7-9 in Chesterfield, Indiana. This is the first time I was able to go, and I thoroughly enjoyed myself! My husband took several days of vacation so he could go with me. We left on the 5th and took a leisurely drive to Chesterfield. I attended classes Thursday, Friday, and Saturday, and he took it easy.
Every day of Tat Days could start in the shop. Anyone interested in beginner needle tatting or shuttle tatting could go early to the shop (Tatting Corner) and get lessons, or just join the tat-n-chat.
Needle tatting lessons at Tat Days 2022A bit of chatting at Tatting Corner
I was so busy tatting and chatting in the classes that I didn’t take many pictures. Here’s one picture of the large room we had all the classes in. We had our meals here as well.
Tat Days classes 2022
On the evening of the 7th Mike Lyon, the Shuttle Commander himself gave a seminar on encasing tatting in resin. My husband got a picture of his back when he took a picture of me. Mike is in the background on the left. He taught several different classes during tat days. I took the one on making Dorset buttons.
Seminar on encasing tatting in resin
Doing the resin pendants was fun. The longest part, besides the drying time, was making sure you eliminated all the bubbles before the resin hardened. Nan discovered that a light on them helped us to find those pesky bubbles.
My tatting pendants
My husband joined this seminar though I furnished the tatting. He was the designated stirrer of the resin and did a fine job. My tatting was very simple because I kept putting off making them. They still make pretty pendants. Most other tatters had tatted a bit more complex pieces. I might have to do something a bit more fancy next time.
I only finished one of my class projects while there. Well, except for hiding the ends, which I did at home. I completed two more projects on the way home, and am currently finishing the outside of the Dorset button. The hardest, most complicated one, Pearl, I’ll do after that. So far she’s looking pretty good, but I was very glad I was at the class with it, I needed the teacher’s help! I’ll be sharing that another day.
I am so happy I was able to go this year. I was able to see several people I had met at Palmetto’s Tat Days years ago and met new friends. The hardest part was remembering everyone’s names! Overall, it was a wonderful experience! Looking forward to next year. I’ll be sharing more about our trip in the next several posts. Hopefully, soon!
“The results you achieve will be in direct proportion to the effort you apply.”Denis Waitley
I haven’t tatted anything new this year for the occasion, but that doesn’t mean I haven’t been enjoying the season.
Patriotic runner
Last year I made a runner for my daughter that I was unable to get to her by the 4th of July or her birthday. It was eventually delivered in November in time for Veteran’s Day. She was able to use it this year for Independence Day. She loves decorating for this holiday.
Patriotic birthday runner
She does such a great job of making her house look festive!
It’s amazing where you find people showing their patriotism. A local farmer showed his 4th of July spirit with these large hay bales.
Patriotic hay bales
My dog also dressed for the occasion.
Bonnie dressed for the 4th
We celebrated the holiday at my daughter’s house last night with family and friends, tonight we’ll do it a bit more locally. We celebrate and thank all of those that have fought for the freedoms we have.
Today I’m packing for our trip to Indiana tomorrow. I’m going to Tatting Corner’s “Artful Tatting” Tat Days at the end of the week. My husband took vacation so he could come with me. Looking forward to seeing all those fellow tatters!
May you all have a happy and safe Independence Day.
“A real patriot is the fellow who gets a parking ticket and rejoices that the system works.”Bill Vaughan
Yes, it has been several weeks since I posted – again! Just when I think I’m getting into a schedule, life happens and everything changes. Then I get out of the habit and I don’t get around to it. I’m sorry, I’ll try to do better!
I have been doing some tatting. I added a bit more to my purse.
Added tatting on my purse
I thought it needed a bit more than what I started with. This vertical strip I put in stiffener before sewing it onto the bag. Now I have something to compare with the method I used with the others. I’ve had several nice comments about my purse since I put it on. 😊 I think I have the stitch count figured out for the square, now on to writing it out.
On the way to making the square, I also made a round medallion.
7 pointed medallion
It’s kind of a snowflake but it looks a bit off. I think it would look better if I’d made it with six or eight points instead of the seven that I did. To me, this looks a bit wonky, not just because it is blocked badly. I’ll probably go back and play with it another time.
We’ve had a temporary pastor for our church for the last several months. We said a fond farewell to him this last Sunday as our new pastor will be here this weekend. I added a cross bookmark to his card.
Graduation bookmark
For some reason, I kept breaking the thread while making this. I think it came out okay in the end.
I have a whole list of items I want to tat but am finding myself not getting to them. I need to knuckle down and get started but my mind keeps going in random directions, not accomplishing much at all. Hopefully, I’ll soon become more focused.
“Focus on the journey, not the destination. Joy is found not in finishing an activity but in doing it.”Greg Anderson
I’m doing a bit of cleaning and changing on my blog, specifically my patterns. I’m moving them from a paid server to Google Docs. I’m doing it mostly in the order they are listed on My Patterns page, so if you’re looking for a pattern and get an error or a message saying it’s not available, let me know by email and I’ll get it for you.
While moving my patterns, I’ve noticed that some of them need to be updated. I guess I have a summer project now. I’ve also noticed how many things I’ve not made or finished the patterns for. I think my summer is full!
I have a cloth purse that I use once in a while, a rather plain purse. I’ve thought about putting tatting on it off and on but never really made an effort to do it. This last week I made a square medallion that I decided would look good on it.
Square medallion on my purse
One of the reasons I’ve not added tatting to something like this is I’m always thinking how dirty it will get, and if not attached right, will come off at corners and edges. My solution – at least until it proves me wrong – was to use fabric glue to stiffen it before sewing it on the purse. I did not stitch down every picot, though I suppose that would be the correct thing to do. (I thought I had the medallion centered and square, but I guess not.)
The other side looked a bit bare after that. When I remembered where I had put the balls of thread I made another square in the same colors.
A medallion and edging on a purse
This medallion looked better turned a few degrees than having it sit square like the other side. Then I thought it needed something on the top flap but not a medallion. So I made an edging along the same lines as the medallion. I’ve made one more edging to go up that one bare side, but I still need to stiffen it before sewing it on.
I’ve been doing some reading the last couple of weeks. Not listening to audio books but reading a paperback. This story is about a house in my hometown, Newton, Kansas. It was built back when the town was new and is still standing today and still has people living in it, though I understand it was empty for a time.
We the House
Besides it being about a local subject, the way the story is told is unique. It is told from the perspective of the house, mostly by way of conversation with a painted portrait of a woman that is hung in the house. The story starts in the 1880’s and goes until about 2010. It is a quick read but enjoyable.
I looked up the address of the house and drove by it the other day. It is about a block away from Sand Creek, which is an important feature in the book. The house is now surrounded closely by other houses, and the creek is much different than it once was. To protect Newton from flooding the creek was made much deeper in the 1960’s and had a dam installed at the south end. I find it hard to imagine the creek different than it is today.
This is obviously a book of fiction, but some of the events in the book are from the history of the town. It came out at the right time, as Newton is celebrating it’s sesquicentenial anniversary (150 years) this year. I talked about the party the city threw on the actual anniversary date that I went to here. Newton is having another celebration tomorrow, June 4, 2022, with bands and rides and other fun things. I’m planning on going if it doesn’t rain.
We celebrated Memorial Day this year with trips to local cemetaries with family, then had the family come over for lunch and games after that. For all that the day is set aside to remember those who died in service to our country my family always visited the graves of our other relatives, too. My mother always grew small containers of flowers for each of the graves we would visit, then we’d drive to the different cemetaries to leave the flowers and tell stories about their lives. My husband and I were not good about continuing that tradition, but this year was a bit like those times I remember from childhood. Except this time I was the one telling the stories.
Memorial Day flowers
“Those who have long enjoyed such privileges as we enjoy forget in time that men have died to win them.” – Franklin D. Roosevelt
